Private Jobs

The Work shall take place at Kankakee Junior High School. The Work includes but is not limited to an addition to the administration area and cafeteria and remodeling of the kitchen, library and all associated site work, structural mechanical, electrical, plumbing and fire protection. Work is to be awarded as a single contract. Refer to the Drawings and Project Manual for the full extent of the Work. Refer to the Drawings and Project Manual for the full extent of the Work.

Proposed Improvement: Consists of hot-mix asphalt road resurfacing, base patching, concrete curb and gutter removal and replacement, minor storm sewer repairs, driveway and sidewalk removal and replacement, structure adjustments, crack sealing, pavement markings, parkway restoration and other miscellaneous work

The project is to remove existing asphalt and install new asphalt pavement at parking areas at the Lake Park East High School and Lake Park West High School. The work includes demolition and off site disposal of removed existing asphalt and excavated subgrade materials, and existing concrete curbs

This project includes, but is not limited to the following: Furnish and install a new Mass Notification System at both Lake Park East & West High Schools. Furnish & install the following misc. electrical items: Emergency battery-operated lighting; New electrical distribution section; Exit signs; Fire Alarm System, including devices and annunciator panels; GFCI receptables; Sprinkler System tamper and flow switch connections

Furnish and install new interior and exterior security cameras at exterior entrances of eight (8) separate school buildings

Scope of Work includes, but is not limited to the following: Modification of a few doors and hardware throughout the school, removal and replacement of carpet in numerous classrooms, and exterior drainage work.

Removal and replacement of numerous pieces of HVAC equipment throughout Hillside School. This includes, but is not limited to, rooftop units, air handlers, classroom unit vents, exhaust fans, condensing units, convectors, cabinet heaters, finned tube heaters and all associated controls, as shown on the drawings and described herein. However, the three RTU’s, two AHU’s and four CUV’s are being pre-purchased by the Owner, but this contractor shall be responsible for demolition and all work needed to install these new units and ensure their proper operation. Other work includes, but is not limited to: pumps, equipment, electrical, controls, flues, curbs, pads, valves, and all components as required for a complete system